Products
Grooving and parting inserts
CNCNarrow carbide inserts for external grooves and parting-off on CNC lathes. Width is the size that has to match the holder. MGMN is the everyday flat grooving and parting range. MRMN has a round top for full-radius grooves. MGGN and GTN are parting sizes for compatible cut-off holders. Internal and face grooves need the matching holder, so include that with the enquiry.
- Parting off
- External grooves
- Cut-off and groove widths

Grooving insert, shown with a round and a square insert
Pavel Ševela · Wikimedia Commons, CC BY-SA 3.0
Types and sizes
These are the standard ISO sizes for this range. The designation does not include brand, chipbreaker, or grade. Send the full code with your quantity and we will confirm stock.
MGMN
Flat top, two edges
The common grooving and parting insert. The number is the width in tenths of a millimetre, so MGMN 200 is 2.0 mm wide.
MGMN 150
- Groove width
- 1.5 mm
- Typical cut
- External grooving
MGMN 200
- Groove width
- 2.0 mm
- Typical cut
- External grooving
MGMN 250
- Groove width
- 2.5 mm
- Typical cut
- External grooving
MGMN 300
- Groove width
- 3.0 mm
- Typical cut
- Parting off
MGMN 400
- Groove width
- 4.0 mm
- Typical cut
- Parting off
MGMN 500
- Groove width
- 5.0 mm
- Typical cut
- Parting off
| Designation | Groove width | Typical cut |
|---|---|---|
| MGMN 150 | 1.5 mm | External grooving |
| MGMN 200 | 2.0 mm | External grooving |
| MGMN 250 | 2.5 mm | External grooving |
| MGMN 300 | 3.0 mm | Parting off |
| MGMN 400 | 4.0 mm | Parting off |
| MGMN 500 | 5.0 mm | Parting off |
MRMN
Round top
Full-radius grooves and light profiling in a grooving holder. Match the width to the blade.
MRMN 200
- Groove width
- 2.0 mm
- Typical cut
- Radius groove and light profiling
MRMN 300
- Groove width
- 3.0 mm
- Typical cut
- Radius groove and light profiling
MRMN 400
- Groove width
- 4.0 mm
- Typical cut
- Radius groove and light profiling
| Designation | Groove width | Typical cut |
|---|---|---|
| MRMN 200 | 2.0 mm | Radius groove and light profiling |
| MRMN 300 | 3.0 mm | Radius groove and light profiling |
| MRMN 400 | 4.0 mm | Radius groove and light profiling |
MGGN
Ground parting edge
Parting and precise grooves. A ground top edge for a cleaner cut-off than a pressed MGMN.
MGGN 200
- Groove width
- 2.0 mm
- Typical cut
- Parting off
MGGN 300
- Groove width
- 3.0 mm
- Typical cut
- Parting off
MGGN 400
- Groove width
- 4.0 mm
- Typical cut
- Parting off
| Designation | Groove width | Typical cut |
|---|---|---|
| MGGN 200 | 2.0 mm | Parting off |
| MGGN 300 | 3.0 mm | Parting off |
| MGGN 400 | 4.0 mm | Parting off |
GTN
Parting insert
Cut-off inserts in 2, 3, and 4 mm widths for compatible parting blades.
GTN 2
- Groove width
- 2.0 mm
- Typical cut
- Parting off
GTN 3
- Groove width
- 3.0 mm
- Typical cut
- Parting off
GTN 4
- Groove width
- 4.0 mm
- Typical cut
- Parting off
| Designation | Groove width | Typical cut |
|---|---|---|
| GTN 2 | 2.0 mm | Parting off |
| GTN 3 | 3.0 mm | Parting off |
| GTN 4 | 4.0 mm | Parting off |