All products

Products

CNC turning inserts

CNC

Negative and positive carbide inserts for CNC lathes. CNMG, WNMG, TNMG, and SNMG cover everyday external turning. DNMG and VNMG give more access for profiles. CCMT, DCMT, and VBMT are the positive shapes used for boring and lighter cuts. Each size below is the ISO inscribed circle, thickness, and nose radius.

  • Roughing and finishing
  • External turning and facing
  • Square and triangular geometries
80° diamond turning insert

80° diamond turning insert

Solaris2006 · Wikimedia Commons, CC BY-SA 3.0

Triangular turning insert

Triangular turning insert

Raizy · Wikimedia Commons, CC BY-SA 3.0

Square turning insert

Square turning insert

Raizy · Wikimedia Commons, CC BY-SA 3.0

Types and sizes

These are the standard ISO sizes for this range. The designation does not include brand, chipbreaker, or grade. Send the full code with your quantity and we will confirm stock.

CNMG

80° diamond, negative

The usual first choice for external turning and facing. Four cutting edges, with a strong corner for medium and roughing cuts.

  • CNMG 120404

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Finishing
  • CNMG 120408

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • CNMG 120412

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    1.2 mm
    Typical cut
    Roughing
  • CNMG 160608

    Inscribed circle
    15.875 mm
    Thickness
    6.35 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • CNMG 160612

    Inscribed circle
    15.875 mm
    Thickness
    6.35 mm
    Corner radius
    1.2 mm
    Typical cut
    Roughing
  • CNMG 190612

    Inscribed circle
    19.05 mm
    Thickness
    6.35 mm
    Corner radius
    1.2 mm
    Typical cut
    Heavy roughing

WNMG

80° trigon, negative

Six cutting edges for general turning. Best at moderate depth of cut, where the extra edges keep the cost per edge down.

  • WNMG 060404

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Finishing
  • WNMG 060408

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • WNMG 080404

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Finishing
  • WNMG 080408

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • WNMG 080412

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    1.2 mm
    Typical cut
    Roughing

TNMG

60° triangle, negative

General turning and facing. The triangle gives more edges than an 80° diamond, with a slightly less rigid corner.

  • TNMG 160404

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Finishing
  • TNMG 160408

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • TNMG 160412

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    1.2 mm
    Typical cut
    Roughing
  • TNMG 220408

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • TNMG 220412

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    1.2 mm
    Typical cut
    Roughing

DNMG

55° diamond, negative

Profiling and general turning when the tool needs to reach into a contour. Use a lighter cut than a CNMG of the same size.

  • DNMG 110404

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Profiling
  • DNMG 110408

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • DNMG 150404

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Profiling
  • DNMG 150408

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • DNMG 150608

    Inscribed circle
    12.7 mm
    Thickness
    6.35 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • DNMG 150612

    Inscribed circle
    12.7 mm
    Thickness
    6.35 mm
    Corner radius
    1.2 mm
    Typical cut
    Roughing

VNMG

35° diamond, negative

Fine profiling and shapes close to a shoulder or tailstock. The sharp included angle needs a light depth of cut.

  • VNMG 160404

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Profiling
  • VNMG 160408

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    Finishing

SNMG

Square, negative

A strong 90° corner for heavier turning and facing, with eight edges on a double-sided insert.

  • SNMG 120404

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    General machining
  • SNMG 120408

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    Roughing
  • SNMG 120412

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    1.2 mm
    Typical cut
    Roughing
  • SNMG 190612

    Inscribed circle
    19.05 mm
    Thickness
    6.35 mm
    Corner radius
    1.2 mm
    Typical cut
    Heavy roughing

CCMT

80° diamond, positive

Boring, internal turning, and light external cuts. Positive rake lowers the cutting force on smaller bars.

  • CCMT 060204

    Inscribed circle
    6.35 mm
    Thickness
    2.38 mm
    Corner radius
    0.4 mm
    Typical cut
    Boring and internal turning
  • CCMT 09T304

    Inscribed circle
    9.525 mm
    Thickness
    3.97 mm
    Corner radius
    0.4 mm
    Typical cut
    Boring and internal turning
  • CCMT 09T308

    Inscribed circle
    9.525 mm
    Thickness
    3.97 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining
  • CCMT 120404

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Finishing
  • CCMT 120408

    Inscribed circle
    12.7 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    General machining

DCMT

55° diamond, positive

Profiling, boring, and finishing where the tool needs access and a free-cutting edge.

  • DCMT 070204

    Inscribed circle
    6.35 mm
    Thickness
    2.38 mm
    Corner radius
    0.4 mm
    Typical cut
    Boring and internal turning
  • DCMT 11T304

    Inscribed circle
    9.525 mm
    Thickness
    3.97 mm
    Corner radius
    0.4 mm
    Typical cut
    Profiling
  • DCMT 11T308

    Inscribed circle
    9.525 mm
    Thickness
    3.97 mm
    Corner radius
    0.8 mm
    Typical cut
    Finishing

VBMT

35° diamond, positive

Fine finishing and profiling, including smaller bores. Keep the depth of cut light.

  • VBMT 110304

    Inscribed circle
    6.35 mm
    Thickness
    3.18 mm
    Corner radius
    0.4 mm
    Typical cut
    Profiling
  • VBMT 160404

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.4 mm
    Typical cut
    Finishing
  • VBMT 160408

    Inscribed circle
    9.525 mm
    Thickness
    4.76 mm
    Corner radius
    0.8 mm
    Typical cut
    Finishing

Need a size from this range?

Send the designation, brand, grade, and quantity. We will confirm what is in stock.

Get a quote